316L Stainless Steel Balls

316 Stainless Steel Balls

AISI type 316L stainless steel balls meet requirements for an unhardened ball with excellent toughness and resistance to corrosion. Corrosion resistance may be increased through annealing. Both non-annealed and annealed balls are widely used in valves and related equipment.

Type 316L is a low carbon austenitic, chromium-nickel-molybdenum stainless steel with general corrosion resistance similar to type 316, but with superior resistance to intergranular corrosion following welding or stress relieving.

It is suggested for use in certain corrosive environments for parts that are fabricated by welding and cannot be subsequently annealed. Parts made from 316L are generally limited to service temperatures up to 800F (425C).

Click Here for Ball Terms and Definitions (Grades Available and Tolerances)

316L Stainless Steel Balls
Part # Grade # Diameter Pkg. Qty Pkg. Price Order Online
KB-2130 100 .062" 100 $23.27 Add to Order
KB-2131 100 .093" 100 $19.78 Add to Order
KB-1637 100 .125" 100 $18.65 Add to Order
KB-1638 100 .156" 100 $22.10 Add to Order
KB-1639 100 .187" 100 $27.43 Add to Order
KB-1640 100 .218" 100 $25.83 Add to Order
KB-1651 100 .250" 100 $50.80 Add to Order
KB-1642 100 .312" 50 $46.94 Add to Order
KB-1633 100 .375" 25 $31.43 Add to Order
KB-1644 100 .437" 25 $53.89 Add to Order
KB-1645 100 .500" 10 $21.56 Add to Order
KB-2132 100 .562" 5 $26.39 Add to Order
KB-2133 100 .625" 5 $35.82 Add to Order
KB-1646 100 .750" 5 $52.31 Add to Order
KB-2134 100 .875" 1 $31.23 Add to Order
KB-2135 100 1.00" 1 $56.75 Add to Order
KB-2136 100 1.125" 1 $61.04 Add to Order
KB-2137 100 1.25" 1 $74.84 Add to Order
KB-2138 100 1.375" 1 $92.95 Add to Order
KB-2139 100 1.5" 1 $109.10 Add to Order
KB-2140 100 2.00" 1 $217.69 Add to Order
Rev. 10-23, 04-23, 03-22

Material

AISI

Federal

Military

ASTM

UNS

AMS

Stainless Steel Type 316L

316

QQ-S-763

-

A-493

S-31603

-

Chemical Analysis

Carbon

0.03% maximum

Chromium

16.0% to 18.0%

Manganese

2.0% maximum

Silicon

1.0% maximum

Nickel

10.0% to 14.0%

Phosphorus

0.045% maximum

Sulphur

0.03% maximum

Mechanical Properties
Hardness as measured on parallel flat surfaces is Rockwell C 25-39.

Tensile Strength

80,000 to 120,000 psi

Elongation in two inches

10.0% to 15.0%

Reduction in area

55.0% to 65.0%

Modulus of elasticity

28,000,000 psi

Density

0.29 lbs./cu. in

© Hoover Precision Products, Inc., All Rights Reserved